What settings should I select on my BBU 210 system?

Each shipped BBU-210 system is already set by us with the correct settings to ensure you will be up-and-running as quick as possible - in case you doubt your current settings follow the steps below:

BBU 210 systems are always 'level-2' type so make sure the level-slider is set to 'level-2' on the [settings-1] page. Also make sure the Device type is set to '3202' and don't forget to SAVE your settings!

If you have a hardware 210.1 system (= blue M2.0 module) make sure you have Module M2.0 selected on the [settings-3] page!

If you have a hardware 210 system (= black/yellow M2.1 module) and software version v2.1.1.921 make sure you select module M2.0!

If you have a hardware 210 system (= black/yellow M2.1 module) and software version v2.1.1.925 or HIGHER make sure you select module M2.1!

Make sure you select the Datalogic DS-1500 as bookblock scanner!

Save your settings - close the application - wait 30 seconds and relaunch BBU! -> you're ready to go :)